Joyetech Espion Solo & ProCore Air Tank Kit Review

Many thanks to Tom over at for sending this kit out for me.
The Espion solo is Joyetechs 10 year anniversary mod, and while in initial pics that I had seen of it, I didn’t really like the look too much, I decided it was worth the once over… and I’m pretty glad I did!  :yes:

Lets start with the

Espion Solo Kit Specs

ESPION Solo Battery Mod
Size: 25.5mm*39.5mm*132.5mm
Screen type: 1.3 inch OLED touchscreen
Screen size: 64*128 px
Output wattage: 1-80W
Output mode: Power/RTC/Bypass/TC(Ni, Ti, SS316)/TCR modes
Atomizer head: ProCA (0.4ohm) head and other ProC series heads
ProCore Air Atomizer
E-liquid capacity: 4.5ml
Resistance range: 0.05-1.5ohm for TC/TCR mode
0.1-3.5ohm for Power mode
Temperature range: 100-315°C/ 200-600°F
Cell using: single replaceable high rate 21700/18650 cell (CDR25A)
Max charging current: 2A
Max output current: 30A
Max output voltage: 9V

In The Box

Joyetech ESPION Solo Kit with ProCore Air Atomizer 80W comes with
1 * ESPION Solo Mod (No Cell)
1 * ProCore Air Atomizer 4.5ml
2 * ProCA-0.4ohm DL. head
1 * 18650 Battery Sleeve
1 * Spare Glass tube
1 * Spare Mouthpiece
4 * Silicon Ring
1 * QC USB cable
2 * Manual and Warning Card
1 * Warranty Card
Spare parts

Looks & Initial Thoughts

Tom always looks after me, and knows that I’m not keen on black coloured vape gear, so when the box came and had the picture of a black mod emblazoned across the front, I was pretty gutted to say the least. Preparing to be totally gutted, I opened the box to find this stunning rainbow coloured mod staring back at me.


The design seems pretty Retro looking to me, and I have to say, it looks way better in the flesh, than in the pics. It has these lines (rather like a grill) on each side, and does have a somewhat mechanical feel to it (not as in a mech mod, but rather like all pieces fitting together to make… well the Espion mod) It has a small Joyetech logo on one side, and Espion Solo on the other. And then on the button is the 10th Anniversary limited edition print. It actually does look pretty good, and I’m sure the colour helps me to like it immensely.

The ProCore Air tank is rainbow coloured too, and popped onto the top of the mod, they do make quite an eye catching combination.

This is a single battery mod, with a curved back/battery cover, so it is nice and comfy to hold, and once I installed the battery it is heavy enough for you to know that you’re holding what feels like a quality device.

And the nice surprise is, it’s a touch screen mod!  :ting:
Continue reading “Joyetech Espion Solo & ProCore Air Tank Kit Review”

Please follow and like us:

Eleaf iStick Pico Baby Review – ‘Stealth Anyone?’

Massive thanks to Tom over at who sent me out a couple of things to try this month. One of them being the very teeny Eleaf iStick Pico Baby! Sure has a long name for such a little thing… I’m just gonna call it the Pico baby

Pico Baby Specs

Size: 41mm*23mm*75mm
Tank diameter: 16.5mm
Weight: 112.8g
E-liquid capacity: 2ml
Battery capacity: 1050mAh
Output wattage: 25W max
Resistance range: 0.4Ω-3.0Ω

In the Box

1× iStick Pico Baby Battery
1× GS Baby Atomizer
1× Magnetic Connector
2× GS Air 0.75ohm Heads
1× USB Cable
2× User Manuals
Spare Parts

Initial Thoughts & Looks

So when I opened the box the first thing to greet me was the colour, I think it’s supposed to be purple but it’s more of a magenta/pink kind of colour. I like it, it’s feminine and fun!

I’ve always loved Pico’s, I’ve got through 3 of the standard pico’s (I kind of worked them to death!)
And I’ve always loved cute, small little novelty type mods, so this ticks both of those boxes. The thing is though small and cute mods don’t really cut it for me anymore, I’m more used to larger devices now. But… I’ll give small and cute a go  :thumbup: Continue reading “Eleaf iStick Pico Baby Review – ‘Stealth Anyone?’”

Please follow and like us:

Eleaf iJust 3 – Could This Be ‘Just’ What You Need?



Wotcha folks, staying in the starter kit category in this review with the iJust 3 that the lovely folks at Eleaf sent out for me to test, thank you to Holy for arranging this. I had one of the old iJust 2’s when they came out, and this was at a time when I wasn’t over keen on direct lung inhaling, now I’m a fully fledged cloud blower so I have really put this kit through its paces.

Lets start with iJust 3 Specs

Diameter: 25mm
Height: 136mm (6.5ml version) / 130.5mm (2ml version)
Weight: 158g (6.5ml version) / 152g (2ml version)
E-liquid capacity: 6.5ml / 2ml
Battery capacity: 3000mAh
Output wattage: 80W max
Resistance range: 0.1Ω-3.0Ω
Colors: red, black, purple, silver, dazzling, blue

In the box

1×iJust 3 Battery
1×ELLO Duro Tank (6.5ml / 2ml)
1×HW-N 0.2ohm Head
1×HW-M 0.15ohm Head
1×USB Cable
2×User Manuals
Spare Parts

How it Looks & Initial Thoughts on the iJust 3

I was pleasantly surprised when I opened the box and was greeted by this lovely purple patterned mod. I’m a sucker for lovely colours and good looking vape kits and this did indeed catch my eye and make me feel all happy and warm inside! But as we all know it’s not just about looking good, it actually has to work well too! Continue reading “Eleaf iJust 3 – Could This Be ‘Just’ What You Need?”

Please follow and like us:

The Uwell Nunchaku Review

So Ceekays vape shack has teamed up again with Vaporl for the month of April, and the lovely folks there sent me out the Uwell Nunchacku for me to feast my beady eyes upon, and what a treat it is! Had to look up Nunchaku in the dictionary… knew I’d heard it before (I was maybe thinking of nunchuck on the Wii  :roll: a Japanese martial arts weapon consisting of two hardwood sticks joined together by a chain, rope, or thong. Hmm there you go!   :yes:

Lets start with the Nunchaku specs

Tank Capacity: 5ml
Mod Size: 27.4mm(d) x 94.5mm(h)
Material:stainless steel & quartz glass & copper &silicone
Power Range: 5-80W
Working Modes: Power Mode, TC Mode(Ni, SS), Bypass Mode
Battery Type: 1 x 18650
Standby Current: <50μA
Voltage Range: 0.7V-7.0V
Resistance Range: 0.1Ω-3Ω(VW), 0.1Ω-1Ω(TC), 0.1Ω-0.5Ω(Bypass)
Temperature Range: 200°F-600°F/100°C-300°C
A new generation of E-cigarette control panel by our independent R&D, makes the tube as safe as a box mod.
Replacement 18650 battery or charge over usb
Plug-pull coils, easy to replace.

In the box

1 x Nunchaku Mod
1 x Nunchaku Atomizer
1 x Extra Quartz Glass
1 x 0.25Ω Coil(pre-installed)
1 x 0.4Ω Coil
1 x Pack of Replacement O-rings
1 x Micro USB Cable
1 x User Manual
1 x Drip Tip Cover(used to cover the drip tip while not using)

So when I opened the box I was thoroughly impressed with the way the Nunchaku was packed. The tank and battery section were in separate slots and both were wrapped in extremely soft plastic (maybe not plastic) bags… I could see the colour through the bags and this caught my attention straight the way…. Blue! One of my favouite colours. Now as you all now, I’m a bit shallow in the fact that I do like mods to look nice, and I’m not overkeen on the colour black for mods (boring!) so I couldn’t wait to get this baby unwrapped…. so skip forward a couple of minutes, and I may have looked a little like this :love2: Continue reading “The Uwell Nunchaku Review”

Please follow and like us:

Ceekay & Vaptio Frogman XL Tank Giveaway!!

  Hey folks…

Ok seeing as those lovely guys over at Vaptio sent me an extra Frogman tank a while ago… and seeing as I already have one, I decided to give one away to one lucky winner.

Now I know (and if you read my reviews, you will know too) that I have had some issues with Vaptio coils…. and  EatmyBB (he’s a youtube reviewer, go look him up and subscribe to his channel, cos he’s pretty awesome with fixing stuff that doesn’t work how it should) found what the problem was, its one of the seals on the atomizer. So…. I will also be sending out a Smok Baby Beast coil with the winning prize!

However do try the Vaptio coil first…. and if you like it… Great!

Have a quick look at the Frogman XL Tank here

So to enter this comp, just do what needs to be done!!

Winner to pay postage, so please be sure you agree to this before you enter, and this comp is only available to the UK.

Good luck y’all! 😀

Win a Vaptio Frogman XL Tank

Please follow and like us:

Aspire SkyStar – Could This Be The Star in Aspires Line Up?

After reviewing the Aspire Speeder a while ago (and hating it) I promised myself that I would never touch another Aspire product in my life. However when the Skystar came out, I kind of went against my own rules! (I’m a woman! We’re allowed to do that!) I loved the look of the mod, and thought I would give Aspire a second chance  :yes:

So I ordered that SkyStar Revvo kit. The Revvo is already reviewed and you can see that here, but these are my thoughts on the SkyStar mod.

Bearing in mind that I purchased this as a kit, these are the specs:

Aspire SkyStar Mod Specs

210W Maximum output Power
1.3 inch Touch Screen
Spring Loaded 510 Connection
Two 18650 Batteries (Not Included)
Micro USB Port for Charging/Firmware updates

In The Box:

1x Aspire SkyStar 210w Mod
1x Aspire Revvo Tank
1x Protective Silicone Cap
1x Micro USB Charge Cable
2x Revvo Tank Coils
1x Replacement Glass
1x User Manual
1x Warranty Card

Initial Thoughts

When I opened the box I was pleasantly surprised, the SkyStar doesn’t look half bad. In it’s pics it reminded me of a shiny pebble, like one of those chalk rocks you find on the beach that has been smoothed all over by rolling around in the sea! I got the white one, which is maybe why I have that image in mind. It’s also available in some other different colours and finishes, including woodgrain! (hate that one!  :roll:)

Picking it up out of the box, and I was surprised, the SkyStar is lightweight… very lightweight. No idea why, but I tend to put light mods like this instantly in the cheap pile! The second thing that made it feel cheap, it feels plasticky! These back and front panels are just cheap plastic… ughh not a good start Aspire  :no2: and I so wanted you to redeem yourself with this mod. The chrome parts are metal, which is good, after the panels I was expecting them to be plastic covered in some kind of metallic paint, but I guess Aspire didn’t totally cheap it out! Continue reading “Aspire SkyStar – Could This Be The Star in Aspires Line Up?”

Please follow and like us: