A huge shout out to Vapesourcing.com for sending me the Sinuous V80 from
Wismec to have a little looky at. I had a Sinuous P80 a couple of years
ago, one of the first ones they did and it was a decent little device,
in fact it accompanied me to Florida on holiday and it did great. So
lets see how the V80compares….
Wismec Sinuous V80 Specs
Size: 27mm * 34mm * 81mm Output wattage: 1-80W Cell type: high-rate 18650 cell (discharging current should be above 25A) Output mode: VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR mode Resistance range: 0.05-1.5ohm for TC modes 0.05-3.5ohm for VW mode Temperature range: 100-315℃/200-600℉(TC modes) Maximum charging current: 2A Output voltage range: 0.5-9V Thread type: 510 spring loaded connector Amor NSE Tank Diameter: 26mm Height: 46mm E-liquid capacity: 3ml
In The Box:
1x WISMEC SINUOUS V80 MOD (no cell) 1x Amor NSE Atomizer 1x WS04 MTL 1.3ohm Head 1x WS-M 0.27ohm head (pre-installed) 1x QC USB Cable 2x User Manual 2x Warning Card Spare part
Initial Thoughts on the Wismec Sinuous Kit
Sinuous kit comes well packaged, and looks really cool when you take
the lid off the box. I got a green one, and its not a bad looking little
kit. Removing it from the box, and you can tell that it’s a budget
device. It’s made from some kind of plastic, and what looks like
aluminium top plate and battery cover. This of course means that the mod
is extremely light, even after you have a popped a battery in.
Those lovely folks over at Urvapin.com sent me out the Nikola Wolverine so I could let you guys know my thoughts.
Nikola Wolverine Specs:
Size: 87.1mm*57mm*32.2mm Material: Zinc Alloy & ABS material Battery: Dual 18650 battery (not included) Thread: 510 Output wattage: 7-230W Output mode: KA, TC(Ni, Ti, SS316, TCR) Max Output Current: 50uA USB charging voltage and current: 5V/ 1.5A Taste mode: Norm/ Soft/ Hard/ User Memory mode: M1/M2/M3 Resistance range: TC mode:0.05s-1.0ohm; KA mode: 0.1-3ohm Temp range: 100℃- 300℃, 200ºF -600ºF
In The Box:
1* Nikola Wolverine Box Mod 1* USB Cable 1* User Manual
Initial Thoughts on the Nikola Wolverine
falling in love with the Nikola Medea a couple of months ago I was
quite excited when Urvapin asked me if I wanted to review the Wolverine,
that was until I actually saw it. The Wolverine is more of a mans mod!
It’s big and chunky, and the colours aren’t fantastic, coming in black
with red paint splatter (which I have) gunmetal, or army green, there’s
nothing really feminine about any of them.
A massive thank you to Wotofo for sending out the Elder Dragon RDA for
me to have a look at. The Elder Dragon was designed and made by Wotofo
and a Japanese reviewer called Ryujin.
Elder Dragon Specs:
Build Deck Diameter: 22mm Overall Height: 34.5mm (with drip tip and 510 pin) Threading: 510 Thread Body Material: Stainless Steel Coil Configuration: Single Coil Juice Feeding Method: Drip / Squonk Insulator Material: German PEEK
In The Box:
1pc Elder Dragon RDA 1pc Coil Trimming Tool 1pc Extra Drip Tip 1pc 510 Drip Tip Adapter 1pc User Manual 1bag Clapton Coil 1bag 3mm Agleted Cotton 1bag Extra Orings & Screws
Included coil specs:
Tri Core Fused Clapton Coil 26Gx3+38G N80 ID 3mm 0.17ohm (40W-75W)
Initial Thoughts on the Wotofo Elder Dragon:
The Elder Dragon comes packaged in Wotofo’s custom black & green coloured box, with a little viewing window on the top, and as always it’s very well presented.
Removing the Elder Drgon from the box,
and I really do like the shape and design of this little RDA. It’s a
22mm single coil, I have the gun metal colour, and it has a shiny
polished kind of finish to it.
The top cap is a nicely finished
piece of engineering, and Wotofo state that it is shaped like a Pagoda.
Google Pagoda and the definition is “a tiered tower with multiple eaves”
So yeah, I can kind of see the resemblance, there is a couple of tiers
on the cap, I guess if you count the drip tip into the configuration too
then it makes more sense.