Wotofo Recurve Dual RDA Review

Massive thanks to Wotofo for sending out their newest RDA, the Recurve Dual which is a collaboration between them and good old Mike Vapes. I like Mike, watch his reviews now and again, and absolutely love the Recurve squonk mod that they brought out a while ago.

Now I thought that I had got the original single coil recurve, but a quick check on the shelf and a-top of my mods and it looks like I haven’t, so this isn’t (actually it can’t be) a comparison  type of review as I don’t have the original to compare it to… 

:no2:

Either way, lets take a look at the Recurve dual.

Recurve Dual Specs:

Diameter: 24mm
Overall Height: 34mm (with drip tip and 510 pin)
Threading: 510 thread
Drip Tip: 810
Body Material: Stainless steel
Coil Configuration: Dual coil
Juice Feeding Method: Drip/Squonk
Insulator Material: German PEEK
Wattage Range: 40-120W

In The Box:

1pc Recurve Dual RDA
1pc Coil Trimming Tool
1pc Squonk Pin
1pc User Manual
1bag Coils
1bag Organic Cotton
1bag Extra Screws & Orings

Included Coil Specs:

Coil: Quad Core Fused Clapton
Material: Ni80
Inner Core: 28G × 4
Outer wire: 36G
Internal Diameter: 3mm
Single Build Resistance: 0.26ohm
Dual Build Resistance: 0.13ohm

Recurve Dual RDA Initial Thoughts

So the Recurve Dual arrived in the normal green and black Wotofo packaging, with a clear see through lid, and nestled in the black foam was the RDA. First look and it’s extremely plain! No over the top branding, and no curved cap like the original Recurve (that’s the only comparison I intend to make) Just a slight curve on the very top of the cap. It’s a 24mm RDA so will fit vast majority of my mods (good thing) meaning it’s not too chunky as some dual coil RDAs are.

Continue reading “Wotofo Recurve Dual RDA Review”
Please follow and like us:
error

The Wotofo Profile Unity RTA Review

I’m going to start this review by declaring my undying love for the Wotofo Profile RDA! Yes I truly-madly-deeply love that little guy, with his mesh coil and huge cotton heart! Seriously at this moment in time (and for the last few months) The Profile RDA has been the only RDA that I have used happily and with no problems.

So you can imagine my excitement when Wotofo contacted me to let me know they were sending the Profile Unity RTA! A tank version of the Profile! 

:happydance:

The Profile Unity RTA is a collaboration between Wotofo, MrJustRight1 and The Vapor Chronicles, and I was expecting nothing short of wonderful from this RTA!

Continue reading “The Wotofo Profile Unity RTA Review”
Please follow and like us:
error

The Wotofo Elder Dragon RDA Review

A massive thank you to Wotofo for sending out the Elder Dragon RDA for me to have a look at. The Elder Dragon was designed and made by Wotofo and a Japanese reviewer called Ryujin.

Elder Dragon Specs:

Build Deck Diameter: 22mm
Overall Height: 34.5mm (with drip tip and 510 pin)
Threading: 510 Thread
Body Material: Stainless Steel
Coil Configuration: Single Coil
Juice Feeding Method: Drip / Squonk
Insulator Material: German PEEK

In The Box:

1pc Elder Dragon RDA
1pc Coil Trimming Tool
1pc Extra Drip Tip
1pc 510 Drip Tip Adapter
1pc User Manual
1bag Clapton Coil
1bag 3mm Agleted Cotton
1bag Extra Orings & Screws

Included coil specs:

Tri Core Fused Clapton Coil
26Gx3+38G N80
ID 3mm
0.17ohm (40W-75W)

Initial Thoughts on the Wotofo Elder Dragon:

The Elder Dragon comes packaged in Wotofo’s custom black & green coloured box, with a little viewing window on the top, and as always it’s very well presented.

Removing the Elder Drgon from the box, and I really do like the shape and design of this little RDA. It’s a 22mm single coil, I have the gun metal colour, and it has a shiny polished kind of finish to it.

The top cap is a nicely finished piece of engineering, and Wotofo state that it is shaped like a Pagoda. Google Pagoda and the definition is “a tiered tower with multiple eaves” So yeah, I can kind of see the resemblance, there is a couple of tiers on the cap, I guess if you count the drip tip into the configuration too then it makes more sense.

Continue reading “The Wotofo Elder Dragon RDA Review”
Please follow and like us:
error

Wotofo Serpent Elevate RTA – Is This a Slithering Success?

So Wotofo are at it again, more new vape stuff, and I was lucky enough to be sent the Serpent Elevate to try out – A huge thanks to Wotofo for that. It’s no secret that I love RTA’s, I don’t have to remember to keep dripping or squonking, and I can throw it in my pocket and take it out (hopefully!) without drowning the inside of my pocket in e-liquid. Will I love the Elevate??… let’s find out!  :dunno:

Serpent Elevate Specs:

Diameter: 24mm
Threading: 510 thread
E-liquid Capacity: 3.5ml
Filling Method: Top filling
Airflow Type: Adjustable top airflow
Insulator Material: German PEEK
Extra Accessory: 4.5ml bubble tube, Coil trimming tool

In the Box:

1pc Serpent Elevate RTA
1pc Coil Trimming Tool
1pc Extra Drip Tip
1pc 510 Drip Tip Adapter
1pc Bubble Tube
1pc User Manual
1bag Clapton Coil
1bag 3mm Agleted Cotton Strip
1bag Extra Orings & Screws

Included coil specs:
Framed Staple Clapton Coil
(28G+38G*9+28G)+36G N80
ID 3mm
0.33ohm (40W-55W)

Initial Thoughts on the Serpent Elevate

So you folks are going to get a slightly different package to what I got, You are going to get the black coil trimming tool seen in this image, and also a glass bubble section (tank glass) (I didn’t get this tool, and my bubble sleeve is plastic) Of course I would imagine if you’re in the EU and you purchase in the EU you won’t get the bubble glass as we have laws!  :roll:

Courtesy of Wotofo

Anyhow, you get the full Wotofo works like usual, lots of little packages, with spares, coils, cotton… I love this so much! There’s everything in the box to get you up and vaping with the Elevate, you don’t need to go scratching around in your cupboards for coil building supplies and tools!  And of course you get the Serpent Elevate.
Continue reading “Wotofo Serpent Elevate RTA – Is This a Slithering Success?”

Please follow and like us:
error

WOTOFO Faris RDTA – Could This Be a Knight In Shining Armour?

Those lovely folks at WOTOFO have been back to the design table and released a brand new RDTA called ‘Faris’ A massive thanks to them for sending this over for me to review. I love getting these WOTOFO products, I just know they’re gonna be awesome!  :yes:

Faris Specs:

RDTA Size: Φ24*44mm
RDA Size: Φ24*36mm
Materials: S.S. + Pyrex
Drip Tip: Colored resin, 810 sized
Threading: 510 thread
E-liquid Capacity: 3ml
Filling Method: Side Filling & Squonk BF Method
Airflow Type: Adjustable side airflow
Insulator Material: PEEK
Extra Accessory: 2ml Frosted PC Tank Tube

In The Box:

1pc Faris RDTA
1pc User Manual
1pc Wicking Port Block
1pc Extra 810 Drip Tip
1pc 2ml Frosted PC Tank Tube
1bag Framed Staple Clapton Coil
1bag Agleted Japanese Cotton
1bag Extra Orings & Screws

Included coil specs:
Framed Staple Clapton Coil
28G+38Gx9+28G+36G; N80
ID 3mm
0.33ohm

Initial Thoughts on the Faris

So opening the box, and I’m like a kid on Christmas morning! Wotofo include little packs of goodies that really make me smile, and of course the Faris is really well packaged.

I have the Gold Faris and I gotta say it looks amazing! Now Wotofo state on their site: Continue reading “WOTOFO Faris RDTA – Could This Be a Knight In Shining Armour?”

Please follow and like us:
error

Wotofo & Rig Mod Flux Kit – Reviewed

A huge thanks to Wotofo for sending this out for review. The description on the Wotofo official site states this:

Presenting the most ideal starter kit, the Wotofo & Rig Mod Flux Kit! This kit contains a Flux Mod and a Flow Pro SubTank. The Flux Mod is co-designed with the renowned American brand Rig Mod and features the simplest operation interface but provides powerful firing options according to your needs.
OK so thats the basics, lets get on with trying this bad boy out….  :wink2: Continue reading “Wotofo & Rig Mod Flux Kit – Reviewed”

Please follow and like us:
error

WOTOFO Profile RDA with MrJustRight1

A massive thanks to WOTOFO for sending out the ProFile for me to cast my beady eyes over. The ProFile is a collaboration with Joel Robinson AKA MrJustRight1 (Do Not google Mr Just Right!! just dont do it!  :fp2: ) but if you want to know more about him, he has been consulted for many projects in the vape industry, and he’s also a vape advocate, and if you watch his video over on his channel (link at the bottom) he seems like a pretty nice fella too.

WOTOFO Profile RDA Specs

1. Flavour can be broken down layer upon layer
2. Break-through mesh style heating element
3. Easy to switch between mesh and wire coils
4. Spring-loaded ceramic support ensuring contact between mesh and cotton
5. 24mm sleeve with accurate air inflow
6. Experience from cool vape to warm vape
7. Up to 30 puffs at 75W before needing to re-saturate the wick when using pancake wicking method

In The Box

1pc Profile RDA
1pc User Manual
1pc 6mm Agleted Cotton Strip
1pc Extra 810 Drip Tip
1pc Bending Tool
1bag Clapton Coil
1bag Mesh Style Coil Sheets
1bag Extra Orings & Screws

Initial Thoughts on the ProFile RDA

Wotofo always seem to pack out their boxes with plenty of extra’s. Little tools. Spare o-rings, coils, mesh, and cotton that looks like half a shoe lace! I love the way they do this, getting extra’s makes the whole unpacking experience so exciting!
Anyhow, the Profile RDA… I have to say I really love the look of this, the machining and finish is excellent. I have the blue one and the colour is lovely, along with a resin type matching 810 low profile mouth piece (there is a slightly higher one in the box if the resin one is a little too close to the cap for you) the only thing I’m not so keen on is the logo, its the word ‘ProFile’ immersed in clouds! It’s fun looking I guess, but it could have been a bit more more on the classy side. Continue reading “WOTOFO Profile RDA with MrJustRight1”

Please follow and like us:
error

WOTOFO Warrior RDA Review

WOTOFO and JMT Elite got together to bring you the Warrior RDA. JMT Elite are a team of hand crafted coil builders, so hopefully these guys should know what they’re doing! Huge thanks to WOTOFO for sending this out for me to review  :thumbup:

Warrior RDA Specifications:

Diameter: 25mm
Height: 33mm
Material: stainless steel
Net Weight: 45g
Gross Weight: 100g

In the Box

1pc Wotofo Warrior RDA
1pc Spare 810 Drip Tip
1pc 510 Drip Tip Adapter
1pc Single Coil Adapter
1pc User Manual
1bag Coils
1bag Agleted Japanese Cotton
1bag Extra Orings

Included coil specs:

Juggernaut coil
(26+36)x2+0.1×0.4 N80
ID 3mm
0.28ohm

Initial Thoughts of the Warrior RDA

The Warrior comes presented really nicely in the normal green and black sturdy packaging that I’ve come to realise is Wotofo’s ‘Thing!  :yes:

The RDA itself looks really nice and well made. The deck is a twin clamp type deck. You get a choice of mouthpieces and an adapter if you would rather use a 510 over an 810. You also get a ceramic insulator to use if you intend to vape this as a single coil RDA, this basically blocks off one side of the deck and airflow. Continue reading “WOTOFO Warrior RDA Review”

Please follow and like us:
error

WOTOFO & Mike Vapes Recurve 80w Squonk Mod Review

A couple of weeks ago I was contacted by WOTOFO who asked if I would like to review some of their products, and lets face it…. who wouldn’t! So here I am with the Recurve 80w squonk mod in my hand, and I’m going to let you know my thoughts!  :smile:

WOTOFO Recurve 80w squonk mod specs

Dimensions: 60.5mm*27.0mm*90.0mm
Body Material: zinc alloy + special rubber coating
Battery Type: single 18650, 20650, 20700, 21700 battery (not included)
Output Voltage: 3.2-4.2V
Max Output Power: 80W
Bottle Capacity: 8ml
Max Charging Current: 2A
Resistance Range: 0.08-3.0ohm

In The Box

1pc Recurve Squonk Mod (Bottle Not Installed)
1pc Silicone bottle with pipe
1pc User Manual
1pc USB Charging Cable
2pcs Battery Adapters

Initial Thoughts on the WOTOFO Recurve Squonk mod

So, just a little background info for you folks, the Recurve Squonk mod is a collaboration between WOTOFO and Mike Vapes. Now some collaborations work  really well, and some not so much! But I do like the fact that manufacturers are working with ‘real vapers’ to better their designs and vape gear.

 

Opening the box and even though the Recurve is black (my least favourite colour!) I was actually surprised at how good the mod looked. Removing it from the box and I was actually in awe at how the Recurve feels! It is so comfy to hold. It’s made from zinc alloy, but it has this rubber coating (reminds me a little bit of the Asvape Micheal) and it’s so soft to touch! It is a little on the heavy side once the battery is installed, but it evens out nicely in the hand as you hold it. And of course the weight does give the Recurve a rather quality feel. Continue reading “WOTOFO & Mike Vapes Recurve 80w Squonk Mod Review”

Please follow and like us:
error