WOTOFO Faris RDTA – Could This Be a Knight In Shining Armour?

Those lovely folks at WOTOFO have been back to the design table and released a brand new RDTA called ‘Faris’ A massive thanks to them for sending this over for me to review. I love getting these WOTOFO products, I just know they’re gonna be awesome!  :yes:

Faris Specs:

RDTA Size: Φ24*44mm
RDA Size: Φ24*36mm
Materials: S.S. + Pyrex
Drip Tip: Colored resin, 810 sized
Threading: 510 thread
E-liquid Capacity: 3ml
Filling Method: Side Filling & Squonk BF Method
Airflow Type: Adjustable side airflow
Insulator Material: PEEK
Extra Accessory: 2ml Frosted PC Tank Tube

In The Box:

1pc Faris RDTA
1pc User Manual
1pc Wicking Port Block
1pc Extra 810 Drip Tip
1pc 2ml Frosted PC Tank Tube
1bag Framed Staple Clapton Coil
1bag Agleted Japanese Cotton
1bag Extra Orings & Screws

Included coil specs:
Framed Staple Clapton Coil
28G+38Gx9+28G+36G; N80
ID 3mm
0.33ohm

Initial Thoughts on the Faris

So opening the box, and I’m like a kid on Christmas morning! Wotofo include little packs of goodies that really make me smile, and of course the Faris is really well packaged.

I have the Gold Faris and I gotta say it looks amazing! Now Wotofo state on their site: Continue reading “WOTOFO Faris RDTA – Could This Be a Knight In Shining Armour?”

Please follow and like us:
error

WOTOFO Profile RDA with MrJustRight1

A massive thanks to WOTOFO for sending out the ProFile for me to cast my beady eyes over. The ProFile is a collaboration with Joel Robinson AKA MrJustRight1 (Do Not google Mr Just Right!! just dont do it!  :fp2: ) but if you want to know more about him, he has been consulted for many projects in the vape industry, and he’s also a vape advocate, and if you watch his video over on his channel (link at the bottom) he seems like a pretty nice fella too.

WOTOFO Profile RDA Specs

1. Flavour can be broken down layer upon layer
2. Break-through mesh style heating element
3. Easy to switch between mesh and wire coils
4. Spring-loaded ceramic support ensuring contact between mesh and cotton
5. 24mm sleeve with accurate air inflow
6. Experience from cool vape to warm vape
7. Up to 30 puffs at 75W before needing to re-saturate the wick when using pancake wicking method

In The Box

1pc Profile RDA
1pc User Manual
1pc 6mm Agleted Cotton Strip
1pc Extra 810 Drip Tip
1pc Bending Tool
1bag Clapton Coil
1bag Mesh Style Coil Sheets
1bag Extra Orings & Screws

Initial Thoughts on the ProFile RDA

Wotofo always seem to pack out their boxes with plenty of extra’s. Little tools. Spare o-rings, coils, mesh, and cotton that looks like half a shoe lace! I love the way they do this, getting extra’s makes the whole unpacking experience so exciting!
Anyhow, the Profile RDA… I have to say I really love the look of this, the machining and finish is excellent. I have the blue one and the colour is lovely, along with a resin type matching 810 low profile mouth piece (there is a slightly higher one in the box if the resin one is a little too close to the cap for you) the only thing I’m not so keen on is the logo, its the word ‘ProFile’ immersed in clouds! It’s fun looking I guess, but it could have been a bit more more on the classy side. Continue reading “WOTOFO Profile RDA with MrJustRight1”

Please follow and like us:
error

WOTOFO Warrior RDA Review

WOTOFO and JMT Elite got together to bring you the Warrior RDA. JMT Elite are a team of hand crafted coil builders, so hopefully these guys should know what they’re doing! Huge thanks to WOTOFO for sending this out for me to review  :thumbup:

Warrior RDA Specifications:

Diameter: 25mm
Height: 33mm
Material: stainless steel
Net Weight: 45g
Gross Weight: 100g

In the Box

1pc Wotofo Warrior RDA
1pc Spare 810 Drip Tip
1pc 510 Drip Tip Adapter
1pc Single Coil Adapter
1pc User Manual
1bag Coils
1bag Agleted Japanese Cotton
1bag Extra Orings

Included coil specs:

Juggernaut coil
(26+36)x2+0.1×0.4 N80
ID 3mm
0.28ohm

Initial Thoughts of the Warrior RDA

The Warrior comes presented really nicely in the normal green and black sturdy packaging that I’ve come to realise is Wotofo’s ‘Thing!  :yes:

The RDA itself looks really nice and well made. The deck is a twin clamp type deck. You get a choice of mouthpieces and an adapter if you would rather use a 510 over an 810. You also get a ceramic insulator to use if you intend to vape this as a single coil RDA, this basically blocks off one side of the deck and airflow. Continue reading “WOTOFO Warrior RDA Review”

Please follow and like us:
error

Geekvape Loop RDA Review – Will it send you ‘Loopy’!

So my second RDA review this month is the Geekvape Loop,  many thanks to David over at urvapin.com for sending this out for me to try.

Features:
1. Unique W Shaped Build Deck
2. Easy coil building for both single and dual coils
3. Allows direct dripping from the mouthpiece without leakage
4. One-piece airflow ring in the middle to ensure convenient airflow adjustment.
Specifications:
Compatible with both 510 and 810 drip tip
Supports both single and dual coils
Side to bottom airflow minimizing leakage
Available colors: stainless steel, black, gold, gunmetal

In the Box:
1* Loop RDA
1* Allen Key
1* User Manual
1* 510 Delrin tip
1*510 Drip tip adaptor
1* Spare parts pack

Looks & Initial Thoughts

The Loop deck is different, and this is what had me so interested in this from the start. It comes boxed pretty nicely, the same kind of see through plastic box that Geekvape normally use, and you get the normal spares, allen key, drip tip adapter and so on.

The Loop looks OK, I have the black one  :sad5: (I don’t like black vape gear…) Anyhow the Loop is a 24mm diameter RDA, standing around 34mm tall, so not overly big. It’s comprised of 3 parts, the mouthpiece, cap and base. The 810 drip tip is described as silver! Its not silver, it’s like a see through grey!  :roll: And the mouthpiece also has the word ‘Geekvape’ around the side. Continue reading “Geekvape Loop RDA Review – Will it send you ‘Loopy’!”

Please follow and like us:
error

The Augvape Templar Review – Is It a Knight In Shining Armour?

Hey y’all, I have a couple of RDA’s to review this month, many thanks to our new sponsor Urvapin for sending these out.

The first up for review is the Augvape Templar.

Features:
Anti-Spitback
Velocity Clamp System (Easy to build for beginners)
Deep juice well
Three-layers airflow control

Specifications:
Stainless Steel 304
24mm(D)*27mm(H)
810 Derlin Drip Tip ( 510 adapter included)
Extra Frosted Bullet Cap
Insulator made of Zirconium dioxide (Dental fillings)
An Ultem Chamber Reducer and a gold-plated Squonk/BF pin are included
Colors: Black, Stainless Steel

Package List:

1*Templar RDA
1* bag of spare parts
1*Extra Bullet Cap

First Impressions

The Templar came packaged pretty much the same as the Druga and the Merlin in a circular tube like box, with the actual RDA protectively surrounded by foam (keeps it nice and safe)  :yes:

This is a low profile RDA, and it is quite a small little fella at 24mm diameter. It comes with 2 top caps. A 2 section metal with adjustable airflow, and a 810 mouthpiece (there is also a 510 convertor in the box) and a frosted bullet cap. These both look pretty nice when in place. The standard cap directs airflow onto the coils from side on, and the frosted cap directs the airflow from slightly above (depending of course on how high you position your coils) Continue reading “The Augvape Templar Review – Is It a Knight In Shining Armour?”

Please follow and like us:
error

The Vandy Vape Phobia Review – Earplugs Needed!

So our new sponsor ‘Healthcabin.net’ joined us for the month of March, thank you Healthcabin  :wink2: and they sent me out the Vandy Vape Phobia to give the once over.
Vandy Vape have made this RDA in conjunction with Alex From VapersMD  (I don’t know who that is… !! :fp2: )

Lets start with:

Vandy Vape Phobia Specs:

Length: 24mm
Diameter: 24mm
Atomizer Type: Rebuildable dripping atomizer
Connection Type: 510 thread
Drip Tip Type: 810 Ultem drip tip
Color: Silver
Unit:1Set
Package:Gift Box

In the Box

1pc Vandy Vape PHOBIA RDA
1pc Drip Tip
1pc Airflow Cap
1pc User Manual
1 bag of spares

So the first surprise when the Phobia arrived was the fact that it has two top caps! One is a domed top cap with a very low profile (is this ULTEM? I don’t know, its yellow so probably… ) 810 drip tip, and the other one is a barrel with a chuff cap on top. The standard cap has the wording ‘no more fear no more phobias’ running around the top edge – Not sure what thats about?  :dunno: Continue reading “The Vandy Vape Phobia Review – Earplugs Needed!”

Please follow and like us:
error

Wismec Luxotic – Luxurious or Luxed Out?

 

Before anyone says it… I know Luxed isn’t a word!  :laughtears:

It seems that a lot of companies are jumping on the ‘squonk wagon’ right now and why should Wismec be any different! Now they’ve had their fair share of cracking devices (some that have developed problems with the 510, or in my case sticky buttons) but they have had some pretty good innovative designs over the last few years. And it always seems one step better when it has Jaybo’s name on it.

So onto the Wismec Luxotic specs:

Size: 43.2*25.1*76.7mm
Thread type: 510 spring loaded connector
Cell type: high-rate 18650 cell
Max output wattage: 100W

Tobhino BF RDA
Height: 28.7mm
Diameter: 22mm

Decorative ring
Height: 5.4mm
Diameter: 25mm

In the box:

1 * LUXOTIC BF BOX
1 * Tobhino BF RDA
1 * E-liquid Bottle
2 * Clapton Coil
1 * Cotton
1 * 810 Top Cap
2 * User Manual
1 * Warning Card
Spare Parts

First Thoughts

I didn’t have to open the box as there is a clear front panel, but my initial thoughts were on the size, its small and cute! Tom sent  me the green honeycomb design Luxotic which I’m actually quite pleased about, lots of mods have the resin finish at the moment and it was rather nice to get something different.

The top cap on the RDA is a little weird looking, and I was surprised to see it with a 510 drip tip, things will get a little hot with that on surely? but we’ll get into that later…. Continue reading “Wismec Luxotic – Luxurious or Luxed Out?”

Please follow and like us:
error

Hellvape Dead Rabbit RDA Review – Happy Bunny or Bunny Boiler!?

After hearing all of the hype about the Hellvape  Dead Rabbit RBA, I had to jump on the bandwagon and see if all the hare-raising comments about this dripper were true! I know, I’m late to the review party as usual! But I wanted a decent Bottom Feed dripper to match my Aleader squonk mod, and the Dead Rabbit I ordered just happened to be silver with a nice blue swirly resin drip tip… so match made in heaven (hopefully, on the looks front at least)

The Dead Rabbit was a collaboration effort from the US Youtube reviewer ‘Heathen’ who I am not actually subscribed too and before the Dead Rabbit I hadn’t actually heard of  :ashamed:… and Hellvape manufacturer. Continue reading “Hellvape Dead Rabbit RDA Review – Happy Bunny or Bunny Boiler!?”

Please follow and like us:
error

Augvape Druga RDA Review

A huge ‘Thank you’ Paul over at Augvape who sent me out the Druga to try and see what I think:

Druga Specs:

  • 24mm Diameter
  • Two Post Build Deck
  • 24 mm Diameter
  • 810 Drip tip
  • 510 Adapter
  • 24K Gold Plated Deck
  • Clamp Snag System
  • Short Ultem Drip Tip And Long Derlin Drip Tip
  • Come With Gold Plated Brass Pin And SS Squonk Pin

In the Box:

  • Augvape Druga RDA
  • Hex Key
  • ULTEM Drip Tip
  • Delrin Drip Tip
  • Spare Part Pack – o-rings etc

Ok so this turned up at my door last week, and let me start by saying that I’ve only started using RDA’s again over the last 12 months (used to use them many years ago when they first made an appearance, and then I got lazy and stuck to tanks and pre-built attys) So I am a typical RDA layman (or woman in this case), I have very little knowledge of terms used. But I do know if something vapes well or not… That being said, lets get on with it. Continue reading “Augvape Druga RDA Review”

Please follow and like us:
error

Phantohm Styled Squonk Kit Review

This is a long-ish review, you may want to get a cuppa  sit comfy and put your feet up. Are you ready?…. then I shall begin  :smile:

Received this from Fasttech for the purpose of this review. Took a couple of weeks for the kit to be processed, shipped and arrive at my door, which is pretty normal for items coming from China.

Unboxing

The kit comes very nicely boxed, with the Phantohm styled squonk mod, and Ampus styled RDA, and a little bag of spares with a couple of springs, some o-rings, a squonk pin, allen key and one of those little blue screwdrivers that you get with absolutely everything you buy! Theres must be billions of these little things in circulation by now!!…
No instructions or safety guidelines though, but then again I have never known a clone to come with anything of that kind.

 

 

 

 

 

 

Continue reading “Phantohm Styled Squonk Kit Review”

Please follow and like us:
error