WOTOFO & Mike Vapes Recurve 80w Squonk Mod Review

A couple of weeks ago I was contacted by WOTOFO who asked if I would like to review some of their products, and lets face it…. who wouldn’t! So here I am with the Recurve 80w squonk mod in my hand, and I’m going to let you know my thoughts!  :smile:

WOTOFO Recurve 80w squonk mod specs

Dimensions: 60.5mm*27.0mm*90.0mm
Body Material: zinc alloy + special rubber coating
Battery Type: single 18650, 20650, 20700, 21700 battery (not included)
Output Voltage: 3.2-4.2V
Max Output Power: 80W
Bottle Capacity: 8ml
Max Charging Current: 2A
Resistance Range: 0.08-3.0ohm

In The Box

1pc Recurve Squonk Mod (Bottle Not Installed)
1pc Silicone bottle with pipe
1pc User Manual
1pc USB Charging Cable
2pcs Battery Adapters

Initial Thoughts on the WOTOFO Recurve Squonk mod

So, just a little background info for you folks, the Recurve Squonk mod is a collaboration between WOTOFO and Mike Vapes. Now some collaborations work  really well, and some not so much! But I do like the fact that manufacturers are working with ‘real vapers’ to better their designs and vape gear.

 

Opening the box and even though the Recurve is black (my least favourite colour!) I was actually surprised at how good the mod looked. Removing it from the box and I was actually in awe at how the Recurve feels! It is so comfy to hold. It’s made from zinc alloy, but it has this rubber coating (reminds me a little bit of the Asvape Micheal) and it’s so soft to touch! It is a little on the heavy side once the battery is installed, but it evens out nicely in the hand as you hold it. And of course the weight does give the Recurve a rather quality feel. Continue reading “WOTOFO & Mike Vapes Recurve 80w Squonk Mod Review”

Please follow and like us:
error

THC Tauren Mech Mod Review

A massive thank you to Vaporl.com for sending me out the THC (Thunder Head Creations) Tauren Mech mod to have a little vape with. This is a fully mechanical tube mod, meaning that it has no built in safety at all! The Tauren isn’t for amateur vapers, and you really do need to know battery safety and ohms law to use this mod. Make you sure that you use a battery from a trusted supplier, some companies will re-wrap batteries and make claims that they are a higher amp battery than they actually are… and this will put your life at risk!  :worried:

I will add a ‘Safety section’ into this review, please do take the time to read it if you intend to use a mech mod of any kind!

THC Tauren Specs:

Size: 26 x 92.5mm(top: 24mm)
Package Size: 39(d) x 110.5(h)mm
Material: Copper / Brass
Battery Compatible : 18650 / 20700 / 21700
Color: Copper / Copper Black / Brass / Brass Black

In The Box

1 X THC Tauren Mech mod
1 X THC Chaining
1 X Flannelette bag
1 X 18650 adapter

Initial Thoughts

So the THC Tauren mod comes wrapped up like a precious Jewel, It’s nestled inside a velvety feeling bag, in which you will find a screw lid tin, and inside this you will find the Tauren mod, along with a keyring (looks a little like dog tags, but the actual tag is a shield shaped piece of metal with the Tauren bull head logo. All very nice but what about the actual mod. Continue reading “THC Tauren Mech Mod Review”

Please follow and like us:
error

Wismec Hiflask Review

Thanks to Vapesoursing.com for sending out the Wismec Hiflask for me to try, another pod type starter kit. With a couple of noticeable differences that you don’t normally get with pod type kits. First it has a catch to release the pod, and it alo has air flow control!  :thumbup:

Wismec Hiflask Specs

Size: 48.6 x 28.2 x 89.0mm(drip tip included)
Liquid Capacity: 5.6ml
Battery Capacity: 2100mAh
Maximum Charging Current: 2A
Output Mode: Direct output

In The Box

1 x HiFlask Battery
1 x HiFlask Cartridge
2 x JVUA 0.35ohm Head
1 x QC USB Cable
1 x User Manual
1 x Set of Spare Parts

Initial Thoughts

First thoughts are, it’s lightweight, very lightweight, in fact it doesn’t feel like there’s a battery inside!  :oooo: The design is nice, comfy in the hand. The shape is (kind of weird) slightly thicker on one end, which does fit the hand quite well.

It has the Wismec Logo one side, and Hiflask on the other, but neither logo’s are in your face like Wismec have done on some of their mods, this is more discreet so will suit some people better.
Continue reading “Wismec Hiflask Review”

Please follow and like us:
error

Joyetech Batpack Kit Review

Thanks to Urvapin for sending out the Joyetech Batpack for me to have a vape on and let you folks know what I think. This is another innovative device as it utilizes Double A batteries, yep batteries that you can pop into the supermarket and buy!!

Joyetech state:

AA batteries have been a long accepted safe power source and it only made sense to utilize them in a vaporizer. You can not only use the normal AA batteries but also use the AA Ni-MH rechargeable batteries, which are all very convenient to buy in the supermarket. The Batpack is incredibly simple and convenient to use and now with ECO technology. ECO Tech still provides the best vaping experience but allows the battery to have a very low output. This extends the battery life by almost double.

Fab! Lets have a look…

Joyetech Batpack Specs:

Size:112.5*37.00*18.0mm
Weight: 88.0g
E-liquid capacity: 2.0ml
Colors: Gold, Dazzling, Green, Red/Gold, Black/Blue, Dark Blue/Pink
Applicable head: BFHN 0.5ohm head
Applicable battery: 2 * AA Ni-MH rechargeable batteries/ normal AA batteries

In The Box:

1 * Batpack
1 * Joye ECO D16 Atomizer
2 * AA Ni-MH Cells (optional)
2 * BFHN 0.5ohm Head
2 * Manual
1 * Warranty Card
2 * Warning Card
Spare Parts

Initial Thoughts on the Batpack

The little device comes well packaged, and opening the box my first thoughts where “Aww how cute!”  :love2: It really is a small, sweet little device. Mine is blue and pink, and removing it from the box it actually feels quite a solid little mod. Continue reading “Joyetech Batpack Kit Review”

Please follow and like us:
error

Eleaf Pico Squeeze 2 Kit Review – Go on… Give It A Squeeze!

Thanks to the brilliant Vapesourcing for sending me out the Pico Squeeze 2 to cast my beady eyes over. I had kind of gone off squonking at the moment, but I’m happy to say using this device has turned the tables again  :ting:

Eleaf Pico Squeeze 2 Specs

Size: 56mm*28mm*97mm
E-liquid capacity: 8ml
Battery type: 21700 / 18650(not include)
Output wattage: 100W max
Output voltage: 0.5V-9V
Charging current: 2A max
Resistance range:0.05Ω-3.0Ω (VW/Bypass mode)
0.05Ω-1.5Ω (TC-Ni/Ti/SS/M1/M2/M3 mode)
Colors: red, black, purple, dazzling, silver

In The Box

1*Eleaf Pico Squeeze 2 Mod(NO CELL)
1*Coral 2 Atomizer
2*Clapton 0.2ohm Coils
1*Cotton
1*Battery sleeve
1*QC USB Cable
1*User Manuals
Spare Parts

Initial Thoughts

Bearing in mind I have the black one (my least favourite colour for mods… ever! We’ll not mention the colour and just pretend that it’s rainbow or something!  :roll: )

 

So… opening the box I was actually pleasantly surprised by the shape and overall design of the Pico Squeeze 2. The edges are rounded so it’s extremely comfy to hold. The top and bottom of the device are stainless steel, the squonk bottle cover is also stainless held into place by a magnet. Continue reading “Eleaf Pico Squeeze 2 Kit Review – Go on… Give It A Squeeze!”

Please follow and like us:
error

USONICIG Rhythm – Ultrasonic Vaping Kit Reviewed!

The lovely Cookie from Vaporl.com is back to sponsor Ceekays Vape Shack over the summer and has sent me a couple of great products out for review.

This month is the Usonicig Rhythm, a new technology in the vaping scene that uses high frequency vibrations with a ceramic coil (not a coil as we know them, more of a ceramic plate) to create vapour. It supposed to vibrate at 2,400,000 times per second, and this turns your e-liquid into vapour, and it will do this with around 30% less heat.

I find it hard to imagine how this exactly works, can vibration really cause liquid to heat and create vapour? Let’s find out…. Continue reading “USONICIG Rhythm – Ultrasonic Vaping Kit Reviewed!”

Please follow and like us:
error

Vandy Vape Pulse 80w Squonk Mod Review

The lovely Lucy at Cvapor sent this to me for review, and I especially wanted this when it first got talked about. Using the Gene chip would have been awesome for this mod, as in my opinion it was a great chip in the Drag (One of the very few things I liked about the Voopoo Drag) Anyhow things went awry, as they often do in business, and the Pulse 80w ended up with Vandy Vape sticking their own chip in this. So… here we go.


Pulse 80w specs

Size    82*56*27mm
Power range – 5-80W
Outout voltage – 0.5-8.5V
Resistance range – 0.05-3.0ohm(VW)/0.05-1.5ohm(TC)
Temperature range – 200℉-600℉/ 100℃-315℃
Colors – Lava Red, Fantastic Blue, Seaweed Green, Aurora Rainbow
510 connector with the creative leaking proof design

In The Box

1*Pulse BF 80W Box Mod
1*8ml Squonk Bottle
1*QC USB Cable
1*Instructional Manual
1*18650 Battery Adaptor

 


Looks & Initial Thoughts

So on opening the box, I wasn’t particularly overwhelmed by the look of the Pulse 80w  :no2: the resin seemed dull, and not quite the colourful look that I was expecting. I have the lava red, and it looks nothing like the shiny colours that you see in the pics in the vendor shots. There is a section of the door panel that doesn’t sit flush against the mod  :fp2: The entire Pulse has a plasticky feel to it (and the finish, I have found is a right dust magnet!) but it’s a decent size, not too big and fairly comfy to hold, and with it being plastic means it’s pretty lightweight too. Continue reading “Vandy Vape Pulse 80w Squonk Mod Review”

Please follow and like us:
error

Teslacigs Punk 85w Review

 

A huge thanks to Fasttech who sent the Teslacigs Punk 80w out for review. I know these have been out for ages now, it’s just one mod that I never seemed to get round to getting hold of, now I have one, do I love it?…

Punk 85w Specs

Dimension: 44*30*86mm
Material: Zinc Alloy +ABS + PC
Cell Type: One Hi-Rate 18650 cell
Output Mode: KA/TC-SS316/ TC-Ni200/TC-Ti/TCR mode
Output voltage: 8.5V
Max Output Current: 30A
USB: 5V/1A
Taste Mode: Norm/Soft/Hard/User
Memory Mode: M1/M2/M3
Resistance Range: 0.1-3.0ohm for Ti/Ni200/SS316/TCR mode
Temperature Range: 100-300℃/200-600°F

In the box

1 *  Punk 85w Mod
1 * USB Cable
1 * User Manual

Initial Thoughts

The box reminded me a little bit of the Apple products box, all white with the image of the Punk 80w outline printed on in gold, and lots of little embossed steam-punk cogs and gears in the corners.  So, pretty nicely packaged, but on removing the lid from the box, I was in awe at this cute little rainbow coloured mod! You do get a very posh looking braided charging cable in the box, along with an instruction manual that you may need a magnifying glass to read!  :fp2: Continue reading “Teslacigs Punk 85w Review”

Please follow and like us:
error

Vaptio Solo F2 Review

Wotcha folks! I had the Vaptio Solo F2 arrive from the lovely folks over at Eco Vapes, along with a couple of bottles of Psycho Bunny eliquid which…. sorry, the Kosh cake, the cake is yummy, the other flavour in there not so much! The second bottle, nope… way too perfumey for me! But a huge thanks for the gesture  :thumbup: If anyone fancies giving Psycho Bunny liquids a try, then do! They really are full of flavour!

So onto the Solo F2

Vaptio Solo F2 Specs:

Dimensions: 22 * 127.5mm
Battery Capacity: 2200mAh
Output Wattage: 50W
Resistance Range: 0.2~3.0ohm
Output Voltage: 4.2V

In The Box

1 * SOLO F2
2 * FROGMAN-X2 0.25Ω NiCr
1 * User Manual
1 * USB Cable
1 * Glass Tube

Initial Thoughts on the Solo F2

Opening the box I was greeted by a nice carbon fibre design, tube type mod. The carbon looks really glossy and has a nice smooth feel to it, so Im assuming it has some kind of lacquer finish to it. It’s classed at grey, but it has a lovely silver shimmer.

Unfortunately due to our EU laws it has a small 2ml tank, this is joined onto the battery as the Solo F2 in an all-in-one kit.
And for an AIO pen style mod its a nice size, fits comfortably into the hand, not too big, and not too much weight to it.

It does look very stylish and classy but without being super huge and in your face like most box mods out there. Continue reading “Vaptio Solo F2 Review”

Please follow and like us:
error

Eleaf iStick Pico S Review

A huge thanks to Tom over at Vapesourcing.com for sending me the iStick Pico S out to review. I have always loved the Pico range, and have vaped several of the standard Pico’s to death!

Lets start with the specs, and what you get for your money…

Pico S Specs

Size: 52.5mm * 28.5mm * 128mm
E-liquid capacity: 6.5ml
Battery type: 21700 / 18650
Output wattage: 100W max
Output voltage: 0.5V-9V
Resistance range: 0.05Ω-3.0Ω (VW/Bypass mode)
0.05Ω-1.5Ω (TC-Ni/Ti/SS/M1/M2/M3 mode)

In The Box:

1×iStick Pico S Box Mod (No Cell)
1×ELLO VATE Atomizer 6.5ml
1×HW-N 0.2ohm Head
1×HW-M 0.15ohm Head
1×QC USB Cable
2×User Manuals Spare Parts

Looks & Initial Thoughts

First off, I’m going to bypass the fact that the kit is black! If you know me, you know that I hate black vape gear! So, moving on…  :roll:

The Pico S retains the basic shape of the original Pico’s, fire button stays in the same place, and the screen too. The biggest makeover seems to be that the whole battery tube unscrews, and there is now a gap between the battery sleeve and the rest of the mod. In between these 2 sections there are a row of LED’s that flash when the button is pressed, and reflect on the battery tube. This seems a little strange as they are mostly hidden, however if you want a mod with lights that aren’t ‘in your face’ then this fits the bill  :yes: Continue reading “Eleaf iStick Pico S Review”

Please follow and like us:
error