Wismec Active & Amor NSE Review – Vape & Music Anyone? — (I killed it! )

(A quick note, if you skip some of this review, just make sure you read the bonus content at the bottom!)

Massive thanks to our sponsor Vapesourcing.com for sending me out the Wismec Active mod and Amor NSE tank to take a little look at.

The Wismec Active is supposedly a rugged little soldier, shock proof, waterproof, and Bluetooth enabled. Why Bluetooth enabled?…. So you can play your music through it of course! 

Why would anyone want to play music through their mod? I have no idea… Seems a little bit gimmicky to me, maybe aimed at the younger vaping generation (18+ of course)    The picture on the packaging shows someone abseiling down the side of the box… Hmmm classic! 

Continue reading “Wismec Active & Amor NSE Review – Vape & Music Anyone? — (I killed it! )”
Please follow and like us:
error

Wotofo Serpent Elevate RTA – Is This a Slithering Success?

So Wotofo are at it again, more new vape stuff, and I was lucky enough to be sent the Serpent Elevate to try out – A huge thanks to Wotofo for that. It’s no secret that I love RTA’s, I don’t have to remember to keep dripping or squonking, and I can throw it in my pocket and take it out (hopefully!) without drowning the inside of my pocket in e-liquid. Will I love the Elevate??… let’s find out!  :dunno:

Serpent Elevate Specs:

Diameter: 24mm
Threading: 510 thread
E-liquid Capacity: 3.5ml
Filling Method: Top filling
Airflow Type: Adjustable top airflow
Insulator Material: German PEEK
Extra Accessory: 4.5ml bubble tube, Coil trimming tool

In the Box:

1pc Serpent Elevate RTA
1pc Coil Trimming Tool
1pc Extra Drip Tip
1pc 510 Drip Tip Adapter
1pc Bubble Tube
1pc User Manual
1bag Clapton Coil
1bag 3mm Agleted Cotton Strip
1bag Extra Orings & Screws

Included coil specs:
Framed Staple Clapton Coil
(28G+38G*9+28G)+36G N80
ID 3mm
0.33ohm (40W-55W)

Initial Thoughts on the Serpent Elevate

So you folks are going to get a slightly different package to what I got, You are going to get the black coil trimming tool seen in this image, and also a glass bubble section (tank glass) (I didn’t get this tool, and my bubble sleeve is plastic) Of course I would imagine if you’re in the EU and you purchase in the EU you won’t get the bubble glass as we have laws!  :roll:

Courtesy of Wotofo

Anyhow, you get the full Wotofo works like usual, lots of little packages, with spares, coils, cotton… I love this so much! There’s everything in the box to get you up and vaping with the Elevate, you don’t need to go scratching around in your cupboards for coil building supplies and tools!  And of course you get the Serpent Elevate.
Continue reading “Wotofo Serpent Elevate RTA – Is This a Slithering Success?”

Please follow and like us:
error

Eleaf iStick Nowos Review

Massive thanks to Eleaf for sending me the iStick Nowos to cast my beady eyes over. This kit actually got me a little bit excited… it’s something slightly different!  :yes:

Istick Nowos Specs:

Size: 43mm*28mm*135mm (6.5ml version)
43mm*28mm*133mm (2ml version)
Weight: 205g (6.5ml version)
200g (2ml version)
E-liquid capacity: 6.5ml / 2ml
Battery capacity: 4400mAh
Output wattage: 80W max
Output voltage: 9V max
Resistance range: 0.1-3.0Ω
Colors: black, red, blue, silver, dazzling

In the box:

1×iStick NOWOS
1×ELLO Duro Atomizer
1×HW-N Dual 0.25ohm Head
1×QC 3.0 USB Cable
2×User Manuals
Spare Parts
1×HW-M Dual 0.2ohm Head (Pre-installed)

Initial Thoughts on the iStick Nowos

Opening the box, and I was pleasantly surprised, the Nowos looks rather sleek and the lack of any buttons apart from the firing button had me rather confused. I normally don’t read the manual unless I have to, and with this…. I had to! I assumed that I would need to twist the fire button to change the settings, but nope…  :dunno: more on this a little later.

 

So, the Nowos has 2 plain white side panels, the Eleaf logo on one side, and the iStick Nowos logo on the other. The edges of the mod are silver metal, with the fire button on one edge. Turn the mod around and on the opposite edge you have the charging port. On the bottom you have 4 vent holes, and on the top the nice springy 510 pin and plate. Continue reading “Eleaf iStick Nowos Review”

Please follow and like us:
error

Eleaf iJust ECM Review & A Feeling Of “Déjà Vu”

Ceekays vape shack sponsors Vapesourcing.com sent me the Eleaf ECM kit to have a play with, it’s a stick type device. Very similar to the last iJust 3 device that I reviewed a while ago, so will be interesting to what the difference is, if there’s any at all  :dunno:

iJust ECM Specs

Diameter: 25mm
Height: 136mm
E-liquid capacity: 4ml
Battery capacity: Built-in 3000mAh Battery
Output wattage: 40W max
Resistance range: 0.1Ω-3.0Ω

Eleaf iJust ECM Kit – In The Box

1 x iJust ECM Battery
1 x iJust ECM Atomizer
1 x EC-N 0.15ohm Head
1 x EC-M 0.15ohm Head
1 x USB Cable
2 x User Manuals
Spare Parts

Initial Thoughts

Well the iJust ECM comes in 4 beautiful colours, and black! And guess which one I got  :roll: So not terribly impressed by the colour, looks wise it’s very similar to the iJust 3, with a couple of differences. Different patterns on the battery, and the tank is slightly different too. The button on the last one was a hexagon, the button on the ECM is triangular… so they have changed a few things, but still playing on shapes.

 

Continue reading “Eleaf iJust ECM Review & A Feeling Of “Déjà Vu””

Please follow and like us:
error

Smok Novo Pod System – Is It Just ‘Another’ Pod?

It’s no secret that I hate Pod systems, hate with a pure driven passion. Probably because they don’t do anything for me, and I find them hard work, hard to draw on, especially if they’re an auto battery.

So when the Smok Novo Pod system turned up at my door, courtesy of Vapesourcing.com it was kind of a ‘M’eh’ moment!

I intend to do a quick review, my thoughts and then this pod can go back in it’s box….  :roll:

Smok Novo Specs:

Parameters
Size: 88.3×24.3×14.3mm
Battery Capacity: 450mAh
Power Range: 10W-16W
Standby Current: <200uA
Capacity: 2ml

In The Box:

1×NOVO Mod
2×Pod(No e-liquid)
1×USB Cable
1×User Manual

The Smok Novo Pod

Opening the box and… well the Smok Novo is ok to look at, I’ve seen worse. I have the blue one with a kind of silver snakeskin type pattern on it. There’s the Smok logo on one side, and the Novo logo on the other. The edge all around the pod is metal. It doesn’t look bad if I’m honest. One side has a small light in the centre, and this lights up as you vape.

 

Continue reading “Smok Novo Pod System – Is It Just ‘Another’ Pod?”

Please follow and like us:
error

Hugo Vapor Delux Review

A huge thanks to the lovely folks over at Urvapin.com for sending out the Hugo Vapor Delux for me have a play with. Lets start with some specs.

Hugo Vapor Specs:

1.33 inch Full Color IPS Screen
Precise Aluminum Processed by German CNC Machine
Differet UI for Different Demand
Advanced Balance Charging & Firmware Upgradeable
Modes: VW(standard/preheat/c1)/Bypass/TC(Ni200/Ti/SS316)/TCR
Dimension:48*90*28.5MM
Material:Precisely CNC Aluminum + Stainless
Wattage Range:1.0-220W
Input Voltage:6-8.4V
Output Voltage:0.5-8.4V
Max Amperes:40A
Resistance:0.06-3.0ohms
Charging Amperes:2A(MAX)

In The Box:

1 * Delux 220W MOD (no cell)
1 * USB cable
1 * User Manual

Initial Thoughts on the Delux

So the Hugo Vapor Delux, a bit of a weird one in my opinion! It comes in a flip top box and you’ll find it nestled in some velvety packing foam, along with a smaller box to one that holds the USB cable, instantly I find myself taking a bit of a dislike to the shape. Its kind of oblong shaped with a circle part at the top, it’s kind of retro looking, and reminds me of something you would find in an old sci fi movie….  :think: Continue reading “Hugo Vapor Delux Review”

Please follow and like us:
error

Wotofo & Rig Mod Flux Kit – Reviewed

A huge thanks to Wotofo for sending this out for review. The description on the Wotofo official site states this:

Presenting the most ideal starter kit, the Wotofo & Rig Mod Flux Kit! This kit contains a Flux Mod and a Flow Pro SubTank. The Flux Mod is co-designed with the renowned American brand Rig Mod and features the simplest operation interface but provides powerful firing options according to your needs.
OK so thats the basics, lets get on with trying this bad boy out….  :wink2: Continue reading “Wotofo & Rig Mod Flux Kit – Reviewed”

Please follow and like us:
error

Wismec Luxotic MF Mod Review

This was sent to me by Vapesourcing.com for the purpose of this review so a huge shout out and thanks to them  :thumbup:

The Luxotic MF is a bit of an all rounder in the vaping world, it can be a single battery squonk mod, or a dual battery VW wattage/temp control mod. The big feature with the mod is that you can change the 100w board for a direct output board that makes it run like a mech mod. This can be used in either dual battery configuration or single battery squonk configuration… The confusing thing seems to be, why add the direct output board when you can run the 100w chip in bypass mode?  :think:

Initial Thoughts

So on opening the box you’re met with a whole array of spare parts, the mod, the direct output board. The guillotine 2 RDA, which I’m actually not going to do a full review on, although I will give a few thoughts on this.

 

Continue reading “Wismec Luxotic MF Mod Review”

Please follow and like us:
error

Eleaf iStick Amnis with GS Drive – Review

Massive thanks to Eleaf for sending out the iStick Amnis kit for me to take a look over. With GS Drive!….. makes it sound like you can sit in it and go for a ride!. Actually the GS Drive is a tank (not a sit in tank, a vape tank!)  :laughtears:

Istick Amnis Specs

Size: 24x18x122mm
Battery: 900mAh internal
Output wattage: 30W max
Resistance range: 0.15-3ohm
Rubber paint finish
Colour battery indicator LED
E-liquid capacity: 2ml
Uses GS air coils – including new Mesh coil
Retractable top fill with child lock

In the Box

Eleaf iStick Amnis mod
Eleaf GS Drive tank
GS Air Mesh 0.35ohm coil
GS Air 0.75ohm coil
QC USB Cable
Spare parts
User manual

Initial Thoughts

So this is back to the days of small and cute in something that isn’t a pod! (thank gawd for that!)
The Amnis kit comes in 2 sections, the battery and the tank. The battery is nicely curved to fit the shape of your hand, making it super comfy to hold, and it has that rubber paint finish (which I am really starting to appreciate) The paint gives the battery a super smooth finish, and makes it more resistant to chipping and scratching if you have this in your pocket, or you’re clumsy like me and prone to dropping things  :oooo:

Please follow and like us:
error

WOTOFO Warrior RDA Review

WOTOFO and JMT Elite got together to bring you the Warrior RDA. JMT Elite are a team of hand crafted coil builders, so hopefully these guys should know what they’re doing! Huge thanks to WOTOFO for sending this out for me to review  :thumbup:

Warrior RDA Specifications:

Diameter: 25mm
Height: 33mm
Material: stainless steel
Net Weight: 45g
Gross Weight: 100g

In the Box

1pc Wotofo Warrior RDA
1pc Spare 810 Drip Tip
1pc 510 Drip Tip Adapter
1pc Single Coil Adapter
1pc User Manual
1bag Coils
1bag Agleted Japanese Cotton
1bag Extra Orings

Included coil specs:

Juggernaut coil
(26+36)x2+0.1×0.4 N80
ID 3mm
0.28ohm

Initial Thoughts of the Warrior RDA

The Warrior comes presented really nicely in the normal green and black sturdy packaging that I’ve come to realise is Wotofo’s ‘Thing!  :yes:

The RDA itself looks really nice and well made. The deck is a twin clamp type deck. You get a choice of mouthpieces and an adapter if you would rather use a 510 over an 810. You also get a ceramic insulator to use if you intend to vape this as a single coil RDA, this basically blocks off one side of the deck and airflow. Continue reading “WOTOFO Warrior RDA Review”

Please follow and like us:
error