Joyetech Ego AIO 2 – 10th Anniversary Edition Review

A huge thanks to Vapesourcing.com for sending out the latest edition of the Ego AIO for me to review.

Ego AIO 2 Specs

Size: φ19.0*119.0mm
Colors: white, silver, black
Battery capacity: 1500mAh
Atomizer capacity: 2.0ml
Output: direct output

In The Box

1 * eGo AIO (10th anniversary limited edition)
2 * BF SS316 0.6ohm head
1 * USB cable
1 * Manual
1 * Warranty card
1 * Warning card
Spare parts

Initial Thoughts

I have had a couple of the Ego AIOs over the years, and have always liked the compactness and design of these little pen type devices, and this one is no different. The Aio is white, with a modern red line design (it looks rather like the London underground map!  :yes: ) The paintwork has a matte finish, overall it looks very nice.
Continue reading “Joyetech Ego AIO 2 – 10th Anniversary Edition Review”

Please follow and like us:
error

Joyetech Batpack Kit Review

Thanks to Urvapin for sending out the Joyetech Batpack for me to have a vape on and let you folks know what I think. This is another innovative device as it utilizes Double A batteries, yep batteries that you can pop into the supermarket and buy!!

Joyetech state:

AA batteries have been a long accepted safe power source and it only made sense to utilize them in a vaporizer. You can not only use the normal AA batteries but also use the AA Ni-MH rechargeable batteries, which are all very convenient to buy in the supermarket. The Batpack is incredibly simple and convenient to use and now with ECO technology. ECO Tech still provides the best vaping experience but allows the battery to have a very low output. This extends the battery life by almost double.

Fab! Lets have a look…

Joyetech Batpack Specs:

Size:112.5*37.00*18.0mm
Weight: 88.0g
E-liquid capacity: 2.0ml
Colors: Gold, Dazzling, Green, Red/Gold, Black/Blue, Dark Blue/Pink
Applicable head: BFHN 0.5ohm head
Applicable battery: 2 * AA Ni-MH rechargeable batteries/ normal AA batteries

In The Box:

1 * Batpack
1 * Joye ECO D16 Atomizer
2 * AA Ni-MH Cells (optional)
2 * BFHN 0.5ohm Head
2 * Manual
1 * Warranty Card
2 * Warning Card
Spare Parts

Initial Thoughts on the Batpack

The little device comes well packaged, and opening the box my first thoughts where “Aww how cute!”  :love2: It really is a small, sweet little device. Mine is blue and pink, and removing it from the box it actually feels quite a solid little mod. Continue reading “Joyetech Batpack Kit Review”

Please follow and like us:
error

Teslacigs Punk 85w Review

 

A huge thanks to Fasttech who sent the Teslacigs Punk 80w out for review. I know these have been out for ages now, it’s just one mod that I never seemed to get round to getting hold of, now I have one, do I love it?…

Punk 85w Specs

Dimension: 44*30*86mm
Material: Zinc Alloy +ABS + PC
Cell Type: One Hi-Rate 18650 cell
Output Mode: KA/TC-SS316/ TC-Ni200/TC-Ti/TCR mode
Output voltage: 8.5V
Max Output Current: 30A
USB: 5V/1A
Taste Mode: Norm/Soft/Hard/User
Memory Mode: M1/M2/M3
Resistance Range: 0.1-3.0ohm for Ti/Ni200/SS316/TCR mode
Temperature Range: 100-300℃/200-600°F

In the box

1 *  Punk 85w Mod
1 * USB Cable
1 * User Manual

Initial Thoughts

The box reminded me a little bit of the Apple products box, all white with the image of the Punk 80w outline printed on in gold, and lots of little embossed steam-punk cogs and gears in the corners.  So, pretty nicely packaged, but on removing the lid from the box, I was in awe at this cute little rainbow coloured mod! You do get a very posh looking braided charging cable in the box, along with an instruction manual that you may need a magnifying glass to read!  :fp2: Continue reading “Teslacigs Punk 85w Review”

Please follow and like us:
error

The Augvape Templar Review – Is It a Knight In Shining Armour?

Hey y’all, I have a couple of RDA’s to review this month, many thanks to our new sponsor Urvapin for sending these out.

The first up for review is the Augvape Templar.

Features:
Anti-Spitback
Velocity Clamp System (Easy to build for beginners)
Deep juice well
Three-layers airflow control

Specifications:
Stainless Steel 304
24mm(D)*27mm(H)
810 Derlin Drip Tip ( 510 adapter included)
Extra Frosted Bullet Cap
Insulator made of Zirconium dioxide (Dental fillings)
An Ultem Chamber Reducer and a gold-plated Squonk/BF pin are included
Colors: Black, Stainless Steel

Package List:

1*Templar RDA
1* bag of spare parts
1*Extra Bullet Cap

First Impressions

The Templar came packaged pretty much the same as the Druga and the Merlin in a circular tube like box, with the actual RDA protectively surrounded by foam (keeps it nice and safe)  :yes:

This is a low profile RDA, and it is quite a small little fella at 24mm diameter. It comes with 2 top caps. A 2 section metal with adjustable airflow, and a 810 mouthpiece (there is also a 510 convertor in the box) and a frosted bullet cap. These both look pretty nice when in place. The standard cap directs airflow onto the coils from side on, and the frosted cap directs the airflow from slightly above (depending of course on how high you position your coils) Continue reading “The Augvape Templar Review – Is It a Knight In Shining Armour?”

Please follow and like us:
error

The Uwell Nunchaku Review

So Ceekays vape shack has teamed up again with Vaporl for the month of April, and the lovely folks there sent me out the Uwell Nunchacku for me to feast my beady eyes upon, and what a treat it is! Had to look up Nunchaku in the dictionary… knew I’d heard it before (I was maybe thinking of nunchuck on the Wii  :roll: a Japanese martial arts weapon consisting of two hardwood sticks joined together by a chain, rope, or thong. Hmm there you go!   :yes:

Lets start with the Nunchaku specs

Tank Capacity: 5ml
Mod Size: 27.4mm(d) x 94.5mm(h)
Material:stainless steel & quartz glass & copper &silicone
Power Range: 5-80W
Working Modes: Power Mode, TC Mode(Ni, SS), Bypass Mode
Battery Type: 1 x 18650
Standby Current: <50μA
Voltage Range: 0.7V-7.0V
Resistance Range: 0.1Ω-3Ω(VW), 0.1Ω-1Ω(TC), 0.1Ω-0.5Ω(Bypass)
Temperature Range: 200°F-600°F/100°C-300°C
A new generation of E-cigarette control panel by our independent R&D, makes the tube as safe as a box mod.
Replacement 18650 battery or charge over usb
Plug-pull coils, easy to replace.

In the box

1 x Nunchaku Mod
1 x Nunchaku Atomizer
1 x Extra Quartz Glass
1 x 0.25Ω Coil(pre-installed)
1 x 0.4Ω Coil
1 x Pack of Replacement O-rings
1 x Micro USB Cable
1 x User Manual
1 x Drip Tip Cover(used to cover the drip tip while not using)

So when I opened the box I was thoroughly impressed with the way the Nunchaku was packed. The tank and battery section were in separate slots and both were wrapped in extremely soft plastic (maybe not plastic) bags… I could see the colour through the bags and this caught my attention straight the way…. Blue! One of my favouite colours. Now as you all now, I’m a bit shallow in the fact that I do like mods to look nice, and I’m not overkeen on the colour black for mods (boring!) so I couldn’t wait to get this baby unwrapped…. so skip forward a couple of minutes, and I may have looked a little like this :love2: Continue reading “The Uwell Nunchaku Review”

Please follow and like us:
error

The Vandy Vape Phobia Review – Earplugs Needed!

So our new sponsor ‘Healthcabin.net’ joined us for the month of March, thank you Healthcabin  :wink2: and they sent me out the Vandy Vape Phobia to give the once over.
Vandy Vape have made this RDA in conjunction with Alex From VapersMD  (I don’t know who that is… !! :fp2: )

Lets start with:

Vandy Vape Phobia Specs:

Length: 24mm
Diameter: 24mm
Atomizer Type: Rebuildable dripping atomizer
Connection Type: 510 thread
Drip Tip Type: 810 Ultem drip tip
Color: Silver
Unit:1Set
Package:Gift Box

In the Box

1pc Vandy Vape PHOBIA RDA
1pc Drip Tip
1pc Airflow Cap
1pc User Manual
1 bag of spares

So the first surprise when the Phobia arrived was the fact that it has two top caps! One is a domed top cap with a very low profile (is this ULTEM? I don’t know, its yellow so probably… ) 810 drip tip, and the other one is a barrel with a chuff cap on top. The standard cap has the wording ‘no more fear no more phobias’ running around the top edge – Not sure what thats about?  :dunno: Continue reading “The Vandy Vape Phobia Review – Earplugs Needed!”

Please follow and like us:
error

Vaptio Solo 2 Kit – Review

Yes I did go out in the snow to get that pic! Crazy?…. Little bit!  :ting:
The Vaptio Solo 2 was sent to me by Jason, so I can give it the once over and see what I think – Huge thanks to Jason.

Solo 2 Specs

2ml – 4ml Tank Capacity
3000mAh Battery
>0.15ohm Resistance Range
30W/40W/50W Output
10 Second Safety Cut-off

Solo 2 – In The Box

1 x Solo 2 Device
2 x 0.25 Kanthal Coils
1 x USB Cable
1 x User Manual

First Thoughts, Looks & Feel

First thoughts on opening the box, love the colour!! These rainbow colours really are very pretty. It’s quite a chunky tube (pen type) mod, with Vaptio – Solo 2 printed onto the bottom of the battery and next to the button you have the setting options, with colour and power setting. This is meh! Maybe this could have been made on a little plastic sticker that you could remove if you didn’t want an instruction set on the side of your mod! However… it is handy to have the options there to see. Saves getting the manual out I suppose! Continue reading “Vaptio Solo 2 Kit – Review”

Please follow and like us:
error

Joyetech eGo AIO ECO Kit – Reviewed

Image courtesy of Vapesourcing.com

Is it a straw? Is is a marker Pen? No its the new eGo AIO ECO from Joyetech! (what a mouthfull that was!)

Ok quick little review of the new starter kit from Joyetech, Going to try and keep this short, just a few thoughts. But first off…

eGo AIO ECO Specs:

Size: 14.0mm*113.0mm
E-liquid capacity: 1.2ml
Battery capacity: 650mAh
Coil: BFHN 0.5ohm head
Max charging current: 1A
Color: Black, Red, Blue, Grey, Green

Joyetech eGo AIO ECO Kit – In The Box

1x EGO AIO ECO
2x BFHN 0.5ohm head
1x USB cable
1x Silicon ring
1x Quick Start
1x Warranty card
1x Warning card

All About The AIO ECO

Ok its small, that small in fact it could indeed be mistaken for a permanent marker pen. Its the same kind of size and shape.

It has a 650mAh battery, that fires at a constant 1.85v output, and you have a 0.5ohm coil so this gives you around about 6.8w. It does feel like more. I only use 2mg (0.2%) nic strength so I’m not really getting a hit from this, but I do believe it was designed for use with nic salts, or at least a higher strength liquid. Continue reading “Joyetech eGo AIO ECO Kit – Reviewed”

Please follow and like us:
error

The Vaptio Wall Crawler Kit – Review

Vaptio sent me two of these kits, thanks very much to the folks over at Vaptio.com. One for review and the other one is of course up for grabs over on the Competition board.

Specs

Tank size: 23.5*54.9mm
E-liquid capacity: 2.0ml
Mod size: 73*50*28.5mm
Screen: 1.3 inch color screen
Wattage: 7-80w
Resistance range: 0.05-2.0 ohm
Battery form factor: 18650

In The Box

1* Throne tank
1* Iron Spider mod
1* User manual
1* USB cable
1* Throne D1 coil, 0.25ohm
1* Throne D2 coil, 1.2ohm

First Thoughts – Look & Feel

My first thoughts on opening the box were, I love the tank, but definitely don’t like the web design on the mod. However… the shape and feel of the mod in my hand is lovely!
Continue reading “The Vaptio Wall Crawler Kit – Review”

Please follow and like us:
error

Geekvape Blitzen RTA Review – Ho Ho Ho!

   

Its been a while since I’ve had a new RTA to play with so I was really looking forward to this arriving. It took 2 weeks from the order being processed for it to drop into my porch, so about normal for something from China. And it was sent to me by Efun.top for the purpose of review, so a huge shout out and Thank you to Zoe for arranging that for me, and for sponsoring Ceekays Vape Shack for this month  :thumbup: Continue reading “Geekvape Blitzen RTA Review – Ho Ho Ho!”

Please follow and like us:
error